USAGE CONDUTUONS

1. Electrolytic capacitors for D.C.application require polarization confirm the polarity before use.If used in reversed polarity,the circuit life may be
　shortened and the capacitor or other components may be damaged. To avoid capacitors expioding innomally, we have developed "case vent"
　whenever the diameter is 6.3x 11mmor over.
2. Use the electrolytic capacitors according to the specified operating temperature range,and do not apply voltage exceeding the specified capacitor
　voltage rating.
3. The capacitance tolerance and D.F. should be tested at 120Hz,25oC The value of the leakage current should be measured at25oC,with rated
　working voltage applied in specified time.
4. For methods of testing the strength of lead wires and Terminals,refer to the specified value of JIS-C5102 and IEC384 to avoid the inner of
　capacitors damaged.
5. Do not place a soldering iron near or on the body of the capacitor to avoid The sleeves of the capacitors deforming and cracking under high
　temperature.
6. Do not use halogenated hydrocarbon solvent whenever solderin capacitors or cleaning the circuit board to avoid the inner of capacitors
　temperature.
7. Be careful of temperature and time when soldering. Dipping must be performed at the soldering temperature,or less than260oC for less than
　10 seconds otherwise the capacitors may be damaged.
8. Capacitors shoule be stored at low temperature and low humidity to have longer storage time. If the storage period is too long, the capacitors
　should be charged before use.
9. Satisfy the customers' requests if they require anti-solvent parts.
10.The specification of products are according to characteristic(W) established by JIS-C5141, IEC384, For methods of processing and testing
　 refer to JIS-C5102 and IEC 384.